مدار سایر آی سی فرمول ها سیم پیچ ترانزیستور ترایاک،تریستور دیود خازن مقاومت لحیم کاری ابزار تعریف روش آموزش خانه
فرمول ها در برق و الکترونیک Basic Electronic Formula    با پیشنهادات دوستان فرمول ها به بخش الکترونیک اضافه گردید:
Resistor Networks Capacitor Network Capacitive Reactance
مقاومت خازن راکتانس خازنی
Ohm's Law Watt's Law Bandwidth and Q Factor
ولتاژ،جریان،مقاومت وات پهنای باند و کیو فکتور
Inductive Reactance Resonant Frequency Frequency and Time
راکتانس سیم پیچ تشدید فرکانسی فرکانس و زمان
Wavelengths Speed of Light  
طول موج سرعت نور  
Impedance of Circuit Inductor Networks  
امپدانس مدار سیم پیچ  

ولتاژ،جریان،مقاومت،وات W,R,I,V

  • E = ولتاژ
  • I = جریان
  • R = مقاومت
    • E = I * R ,     محاسبه ولتاژ
    • I = E/R,        محاسبه آمپر و جریان مدار
    • R = E/I,       محاسبه مقاومت بر حسب اهم 

سری، موازی مقاومت ها

  • نماد مقاومت= R : R1...R2...Rn
  • Rn = مقاومت های بیشتر
  • Rt = مقدار مقاومت کل
  • فرمول محاسبه مقاومت کل در حالت سری : Rt = R1 + R2 +R3....+ Rn
  • فرمول مقاومت کل درحالت موازی بودن دو مقاومت : Rt = ( R1 * R2)/(R1 + R2)
  • فرمول محاسبه مقاومت کل درحالت موازی بودن بیشتر از دو مقاومت: Rt = 1/ (1/R1 + 1/R2...+1/Rn)
  •  1/Rt = 1/R1 + 1/R2.....+1/Rn    شکل دیگری از فرمول

Top Up The Page پرش به بالا

سری، موازی سیم پیچ ها

  • Inductors are labeled by a # following the L : L1...L2...Ln
  • Ln = Continues for all the Inductors you have.
  • Lt = Inductance total
  • Inductors in SERIES add : Lt = L1 + L2 +L3....+ Ln
  • Two (2) Inductors in PARALLEL : Lt = ( L1 * L2)/(L1 + L2)
  • More than Two Inductors in PARALLEL: Lt = 1/ (1/L1 + 1/L2...+1/Ln)
  • Another form of this formula is : 1/Lt = 1/L1 + 1/L2.....+1/Ln

سری، موازی خازن ها

  • Capacitors are labeled by a # following the C : C1...C2...Cn
  • Cn = Continues for all the Capacitors you have.
  • Ct = Capacitance total
  • Capacitors in PARALLEL add : Ct = C1 + C2 +C3....+ Cn
  • Two (2) Capacitors in SERIES : Ct = ( C1 * C2)/(C1 + C2)
  • More than Two Capacitors in SERIES: Ct = 1/ (1/C1 + 1/C2...+1/Cn)
  • Another form of this formula is : 1/Ct = 1/C1 + 1/C2.....+1/Cn

Top Up The Page پرش به بالا

فرمول های محاسبه توان

  • P = Power - measured in Watts
  • I = Current - measured in Amperes
  • E = Voltage - measured in Volts
  • R = Resistance - measured in Ohms
    • P = I * E, answer in Watts
    • P = I*I*R, answer in Watts
    • P = E*E/R, answer in Watts

راکتانس سیم پیچ ، خازن

  • Inductive Reactance
    • Pi = = 3.14
    • f = Frequency, in Hertz
    • L = Inductance of coil, in Henries
    • Xl = Inductive Reactance, in Ohms
      • , answer in Ohms
      • Note: Xl is a linear function, it increases as frequency or inductor value increases.
  • Capacitive Reactance
    • Pi = = 3.14
    • f = Frequency, in Hertz
    • C = Capacitance in Farads
    • Xc = Capacitive Reactance, in Ohms
      • , answer in Ohms
      • Note: Xc is inversely proportional to frequency and capacitance. If either frequency or capacitance increase, Xc decreases.

      Top Up The Page پرش به بالا

همگرایی در مدار سری: خازن، مقاومت، سلف

  • Resonance occurs when Xc and Xl are equal to each other.
    • Fo = Frequency of resonance, in Hertz
    • Pi = = 3.14
    • L = Inductance in Henries
    • C = Capacitance in Farads

    پهنای باند و فاکتور کیفیّت

  • Q = Quality Factor of the circuit.
  • BW = Bandwidth in Hertz
  • Xl = Inductive Reactance of the Inductor
  • R = Resistance of Inductor plus any external Resistance
  • Fo = Frequency of Resonance
    • Q = Xl / R, Quality Factor
    • BW = Fo / Q, measured in Hertz
    • Note: As Quality Factor increases the Bandwidth decreases, but, has more gain. And the opposite is true, as well. When the Quality Factor decreases the Bandwidth increases, but, has less gain.

طول موج

  • Wavelength is how long a wave is for a given Frequency.
  • The speed of light is 186,000 miles per second or about 300,000,000 meters per second.
  • f is the Frequency in Hertz/second (or Cycles/Second)
  • Wavelength = (300,000,000 meters/second) / ( f in Cycles/Second)
  • The answer is in meters/cycle

Top Up The Page پرش به بالا

فرکانس و زمان

  • f is the Frequency in Hertz/Second or Cycles/Second
  • t is time in Seconds
  • f = 1/t , answer in Hertz/Second or Cycles/Second.
  • t = 1/f , answer in Seconds

امپدانس مدار

  • Xc = Capacitive Reactance, in Ohms
  • Xl = Inductive Reactance, in Ohms
  • R = Resistance, in Ohms
  • Z = Impedance, in Ohms
  • Rules for when you have a circuit with both Capacitive and Inductive Reactances
  • When Xl is larger than Xc use the formula in figure (a) , If Xc is Larger than Xl use the formula in Figure (b).

دیدگاه شما  Your Comment  

free counters